We had our pool installed in 1999 and still had the original pump/motor combination until a month ago. The unit is a Jucuzzi Magnum Force Plus (1.5Hp) pump assembly that I believe the model number on the case says 15TMP-52. I cant be certain on the last two digits being 52, its almost gone off of the sticker.
Although the motor is a 2 speed unit, we never used it at the lower speed. Last season, the pump started leaking and I decided as a winter project to replace the bearings and seals. Because of the severe corrosion in the unit, I had to destroy the impellor to get it off. Also, one of the case motor thru bolts sheared off while trying to remove the armature. My question, is as follows. Would I be better off buying a new Jacuzzi pump and motor such as the 1.5HP Magnum force or buy a replacement motor, seals, impeller, capacitor, etc. and rebuild my exisiting unit. If I purchased the replacement motor from you, will it be able to adapt with the seal housing, and motor support to mount to my 18 year old magnum body. If it helps you, the name plate on the motor says: Magnetek. 1081 Pool Pump Duty Mount Horiz with Ve Holes down. Serial Number BP11-227, Type CXPM. Frame:Y56J. I hope that this is enough information regarding my motor for you to assist me.
Thank you
Herman Kozub