When replacing the spider gasket on this model should it be glued??
Pentair 261177 diverter valve
- 154 Views
- Last Post 16 March 2018
Dmartinez77
posted this
15 March 2018
- Last edited 16 March 2018
InyoRob
posted this
16 March 2018
We would not recommend using glue. You can use an RTV silicone to keep it in place. The RTV silicone is much easier to remove when you have to replace the spider gasket in the future.
If you use the RTV silicone, wait 24 hours before running water through the valve. It needs time to cure.
