Filter Leak - Sta-Rite System 3

  • 965 Views
  • Last Post 21 September 2023
jhoff8252 posted this 11 August 2019

I have a Sta-Rite System 3 DE filter that recently started to leak from where the top and bottom housings meet.  I replaced the seal that lines the perimeter of the bottom housing, thinking the old one must have degraded, but it made no difference whatsoever.  I applied silicon lubricant when I installed it and it appears to be seated properly.  I also watched a video suggesting I follow a specific order when tightening the bolts around the outside and use a rubber mallet to gently tap the perimeter while tightening to ensure a proper seal.  Again, none of that helped resolved the issue.  What am I missing here?  Any advice would be greatly appreciated!

Order By: Standard | Newest | Votes
jhoff8252 posted this 23 August 2019

It's been 2 weeks without a comment.  Has no one come across this issue before?

coreytrv posted this 21 September 2023

This is a good question, having same issue. Some direction on possible ways to diagnose/repair would be great!

Close