My Aquarite Salt System is displaying HI and I have to over ride by switching to Super Chlorine. I have replaced both the Salt Cell and the PCB and aam stumped what to do next.
Thanks,
Tom
My Aquarite Salt System is displaying HI and I have to over ride by switching to Super Chlorine. I have replaced both the Salt Cell and the PCB and aam stumped what to do next.
Thanks,
Tom
You're welcome!
The red light that indicates there is too much salt is now lit. Thanks for your help!
The "HI" message will also appear if the salt level is too high (>3400ppm).
The correct cell was selected. I cycled through the selections again but it is still showing HI.