Hello.. and thanks in advance for any help.. I have a 12 year old pool... all original parts/pumps.. yesterday the pump was running most the day then just shut off... it wouldn’t restart.. looked at the external run capacitor and it had visible swelling and damage.. I have replaced it once 5 years ago.. replaced it today and same problem... the pump hums and the impeller turns for about 5 seconds and shuts off...I’m at the limit of my experience... it’s a AO Smith Century 2 speed 2hp pump type CXPM 60Hz SF 10.0/3.5 amps thermally protected motor... part # 7-193990-07 FR Y56Y 3450/1725rpm I hope that makes sense... what could be the issue.? Does this pump have a internal start capacitor..? I really want to fix this myself... any idea.? Also what motor could I use to replace the old one with should it come to that.? Thanks guys.... Paul
Pool pump motor
- 493 Views
- Last Post 08 October 2018
InyoRob
posted this
15 August 2018
There is a start capacitor in your motor. The capacitor is part number 610807-007.
If that isn't the problem, you may have a bad phase winding. The motor would need to be replaced if that's the case. The replacement motor would be model B2983.
mntbike01
posted this
07 October 2018
I have the same motor with part number part # 7-193990-07 FR Y56Y. The pump started getting loud over the last three week. I believe that i need to replace the bearing. Do you have the recommended part needed to get this job done.
InyoMatt
posted this
08 October 2018
The B2983 motor requires two of the 203 Motor Bearings - (10000353).