I have a 15 x 30 oval purchased to 2005 that uses Top Cap 14442 which is listed for round pools (like Escalade if I recall) - I measured andthe capt conforms exaclty to the dimensions - the 360 shows the exact same warning - the top plate shown as matching for the 14442 is very close to mine but has no square cut out = I need 20 top plates and may be able to mod the ones shown but would rather get like original is they can be found - also need top rail all around (or all oval if youd rather ) the rail shown also appears to be correct for mine but there is no listed for curved sections. Got any idea what pool I've got?
Pool not listed
- 190 Views
- Last Post 02 February 2017
GeoQuest
posted this
22 January 2017
- Last edited 06 February 2017
InyoRob
posted this
24 January 2017
Hello GeoQuest - We'd be glad to identify your pool. Could you post the following pictures?
- Outside Pool Wall (Top To Bottom)
- Top Rail
- Top Cap
- Upright
GeoQuest
posted this
01 February 2017
hope these pics help - in ground so a bit hard to capture wall an posts
InyoRob
posted this
01 February 2017
It does appear that you have the Escalade model. The manufacturer confirmed the correct parts. The 15'x30' oval would require the following top rails and top plates.
Top Rail Curved, Resin - Part Number 16552 (Qty 10)
Top Rail Straight Side, Resin - Part Number 16555 (Qty 10)
Top Plate Curved Side - Part Number 14439 (Qty 12) (This one will work even though it has a square cutout)
Top Plate Straight Side - Part Number 10136 (Qty 8)
GeoQuest
posted this
02 February 2017
I do not need the resin top rails i need the replacements for the first 2 photos the plates and he metal piece that wraps the top of the wall
InyoRob
posted this
02 February 2017
I apologize. In your original message, you stated that you needed the top rails. The thin metal rims at the top are called stabilizers. Your pool would require the following stabilizers.
Part Number 10307 (Qty 10)
Part Number 16545 (Qty 6)
Part Number 16546 (Qty 8)
Part Number 16547 (Qty 4)
