I lose all water flow when my system is on filter but flows just fine when in whirlpool position. What would do that?
Above ground pool
- 160 Views
- Last Post 14 June 2018
InyoRob
posted this
14 June 2018
Thank you for contacting Inyo. That's usually the sign of a filter that needs to be cleaned. What is the PSI reading when it is in filter mode?
TJnAshley
posted this
14 June 2018
Either really high or the pressure gauge doesn’t work.
TJnAshley
posted this
14 June 2018
And when you say filter are you referring to the one in the pump?
InyoRob
posted this
14 June 2018
I'm not referring to the basket in the pump. What kind of filter do you have? Is it a cartridge, sand, or DE filter?
InyoRob
posted this
14 June 2018
Try backwashing the filter and see if the PSI drops and if the water flow improves.
TJnAshley
posted this
14 June 2018
Done that and i gain some water flow. The pressure doesn’t change.
InyoRob
posted this
14 June 2018
Either the sand needs to be replaced or you need a new pressure gauge. I would start by replacing the pressure gauge.