Waterway pump/motor parts

  • Last Post 22 November 2017
paullap posted this 15 October 2017

I have a Waterway Pump for an above ground pool. The motor has gotten very load, I suspect the bearings are gone. The Waterway label says SD-15-2N11CC. There's another label for the moror that is MagneTek 7-177782-03.  The motor is a 2 speed. I would like to replace the bearings on the motor and seals on the pump. Do you have those parts?




Order By: Standard | Newest | Votes
paullap posted this 15 October 2017

sorry, it's gotten very loud! LOL

InyoRob posted this 17 October 2017

Hello Paul - We'd be glad to assist you. Your motor would require two 203 bearings. If you decide to replace the complete motor, the model number is BN37. This is a 1HP 2-speed motor.

We would also recommend replacing the shaft seal and o-ring. The part number for the seal is 5250-106 and the o-ring is 4600-4493.

paullap posted this 22 November 2017

Thank you. In my attempt to remove the impeller the threaded shaft end snappd off! So, I'm now looking to replace the entire motor. Oh well.


Is there a replacement wet end that will easily mount on the BN37 motor you noted above? I have a side discharge pump.




InyoRob posted this 22 November 2017

You could use the Waterway Hi-Flo wet end. The part number is 310-1130SD. This is a 1HP side discharge wet end.

Waterway WET END,SIDE 1HP (2" x 2"<img src= HI FLO (310-1130SD)" width="320" height="320">