Hi. As you'll see from the photo, our pump has three feeds: the main drain, the cleaner, and the skimmer. Two of their valves have broken handles and I was going to replace them with 2-way Jandy-type valves. However, is there a better way of doing this by reconfiguring the whole thing with at least one 3-way? If there is, I can't visualize it!
Pool pump valves
- 622 Views
- Last Post 06 February 2017
Ruprecht
posted this
30 January 2017
- Last edited 06 February 2017
InyoRob
posted this
06 February 2017
Glad we could help. Please come back and post a picture of your reconfiguration. We'd love to know how it turns out. Good luck!
Ruprecht
posted this
06 February 2017
Rob, I don't think there's room for the birds-eye view as above as I don't have much room in front of the pipes, but it would if I stack the pool drain pipe and three-way above the skimmer and cleaner pipe. Thanks for your suggestion. Ruprecht, Florida.
InyoRob
posted this
30 January 2017
Hello Ruprecht - We'd be glad to assist you. Below is the best diagram I could find. You'll notice that there are two skimmer lines. You could make one of those the cleaner.