Hello, I just purchased a replacement motor for my spa. Original motor was a 1.5hp/1.1sf Centurion motor by AO Smith. There were 5 wires coming into the motor terminal board. L1 was red. L2 was black. White wire was hooked to B. Brown wire was hooked to A. Green wire was hooked to Green terminal. All this was per the motor label for 230v operation.
My new motor(B854) terminal board has only 3 visible connections(L1, L2 and Green) and a switch set at 230V. What do I do with the remaining white and brown wires coming from my power source?
Thanks.
J