Jandy AquaLink 1400

  • Last Post 15 September 2020
LucyB1016 posted this 14 September 2020

Just converted to salt with used chlorinator system. Everything looks in great shape. Former owner replaced cell about 2 years ago. Added salt and got salinity to 2.7. Says cell "on" but is showing code 125 and 194.

Order By: Standard | Newest | Votes
LucyB1016 posted this 14 September 2020

Should I try muratic acid on cell as stated in manual (2/3 water 1/3 acid). Clean connections??

InyoPatrick posted this 15 September 2020

Hi Lucy,

The Jandy Error 125 and Jandy Error 194 mean...

Jandy Error 125 - Cell needs to be cleaned or replaced.

Jandy Error 194 -Cell Current is 85% lower than desired and cell voltage above 19V (generates 125 code - Cell dirty or needs replacement).

Yes we would suggest cleaning the cell and if that does work then replacing the cell with this Jandy 1400 Replacement Cell

Also below is a photo of the troubleshooting steps from Jandy PureLink Troubleshooting Guide

Jandy Error 125 and 194

  • Liked by
  • InyoRob