I have a Jandy .75 HP pool pump that powers a water fall water feature in my pool. It is a Model PHPF.75 and is about 15 years old. The electric moter attached to the pump failed. It is a Century Centurion, A.O.Smith, Part number 7-193985-04, 230/115 volt. I would like to replace both pump and motor as one unit but cant find a suitable replacement. can you recommend a unit that will work.
I need knew pool pump
- 117 Views
- Last Post 06 July 2021
Service
posted this
25 June 2021
Hi Dhulett,
The complete PHPF.75 is no longer available, because of this I would suggest just replacing your motor as you will not need to do any replumbing which will make the installation process much easier, also typically the motor is all that needs to be replaced. You will require this PHPF.75 Replacement Motor and this PHPF.75 Seal Kit. We put together this Video on How to Replace a Pool Pump Motor which you may find helpful when you tackle this project.
Dhulett
posted this
28 June 2021
Hi Patrick. My pump is malfuctioning also so I would like to buy a motor and pump assembly together as one unit. I just want to make sure the water flow capacity is comperable to my old Jandy pump so the waterfall comes out at the same rate as before. I can easily rework the plumbing to fit the new unit. I just cant figure out the right replacment pump.
Thanks for your hep.
Service
posted this
06 July 2021
Hi Dhulett,
I would suggest this Waterway 3/4 HP Full Rate Champion Pump as a suitable replacement for your Jandy PHPF.75 Pump.
