tomhglg
posted this
23 August 2018
- Last edited 23 August 2018
Hello Rob,
Thank you for your response! It's a 16x32 inground Grecian type pool, so I think it contains about 15000 gallons. No, the pump and filter haven't been replaced recently.
Here are some photos of my pool, pump, and current equipment setup. When I detach the connector from the pump outlet to the multiport valve, the pump can prime and the water flows and builds up as expected. The bottom diverter valve controls the water from the vacuum. For the other two inlets, I'm not sure which one is from the main drain and which one is from the skimmers. If I open the connector and leave the setup that way, the pump will prime after 5-10 secs. I close the connector, the pressure gage shows 0 psi, the pump sucks water from the inlets, and then nothing soon after.
Thank you for your help!