How to get thr top of the pentaire cc200 to fit on bottom
Pentaire 200 soft filter housing
- 245 Views
- Last Post 21 January 2020
- Topic Is Solved
Joel22
posted this
13 January 2020
- Last edited 15 January 2020
Inyohector
posted this
21 January 2020
Sounds like you have purchased a new lid and are trying to use it with an older base. If so, the base may have contracted over time due to the pressure changes in the filter. Or you may want to look into another replacement o ring as another one may be a little thinner. Also, be sure the pressure relief valve is open on the top of the filter lid as that may help release any air pressure while attempting to install.
Inyohector
posted this
15 January 2020
The lid for the model Pentair CC200 cartridge filter is held to the base/bottom by a locking ring. You can view that and the rest of the filter parts by clicking here.
Joel22
posted this
21 January 2020
The trouble Is I can't get it over the O ring,so the locking ring will lock
Joel22
posted this
21 January 2020
Even with magic lube
Joel22
posted this
21 January 2020
Ordered new O ring