Looking for Rails and Caps

  • 228 Views
  • Last Post 25 June 2021
PJanosz posted this 01 June 2016

We are trying to locate rails and caps for our above-ground pool.  However, we are unsure as to the manufacturer.  Therefore, we have attached a photo in the hope that you might be able to identify the type of pool and necessary replacements visually.  The measurements for the rails, as far as we can ascertain, are as follows:

 

Length-50"

Width (w/angle)-18"

Width (w/o angle)-71/8"

 

The pool's diameter is 24 feet.

 

We'd appreciate any advice/information you could provide.  Thank you very much.

 

 

Order By: Standard | Newest | Votes
Service posted this 01 June 2016

Thanks PJanosz can you find any part # embossed into the plastic top cap that goes in between the top rails, this # is normally on the underside of the top cap so you would need to remove the top cap to locate. Let me know.

Thank You

Patrick

www.inyopools.com

Thank You

Patrick

www.inyopools.com

Service posted this 02 June 2016

I got word back on this...

That should be part number 12786 49-7/8" long and 7" wide And the top cap is 13614

 

Thank You

Patrick

www.inyopools.com

kellyjeff4 posted this 02 May 2017

I'm looking for top rails and caps but don't know maufacture please help. 

InyoRob posted this 02 May 2017

Hello KellyJeff4 - It looks like the Ponderosa model. What is the size of the pool?

PeterPav posted this 21 June 2021

Looking for part numbers for top rails and caps for my 21" round pool. Rails are almost 57" long.

InyoRob posted this 25 June 2021

Hello PeterPav - This is a Delair brand pool. We do not currently carry Delair parts. We recommend trying TeddyBearPools.com.

Close