Hello,
I recently purchased a replacement motor from you for my 1HP Hayward Super Pump, since I'm at
I am going to replace everything, ie: impeller, diffuser, and gaskets.
However, the nameplate /tag is totally worn off. I'm not sure which replacement parts diffuser, etc for my pump. Most are standard, except the impeller and diffuser.
Hi Sparky,
For us to suggest the proper parts could you send a photo of a wide shot of your complete pool pump to show the pipes going in and out of the pump? As well as close-up shot of the motor label showing the amps, HP, SF, Volts, etc.. Once we get this photo we can make the proper recommendation for the parts.
I Hope this helps. The motor was bought between 1999 - 2002, my best guess. Thanks, Sparky
Thanks Sparky! You will require this 1 HP Hydraulic Kit for Hayward Super Pumps.
Patrick or INYOpools,
I have all of the other parts from a few purchases last year.
Can I purchase the "Generic Super Pump™ Style Drive Train" separately, without the
kit?
Hi Sparky,
Yes, you can purchase the generic super pump style drive train kit separately by clicking on this link here https://www.inyopools.com/Products/07501352011096.htm if you need any of the individual components of the generic super pump style drive train kit, just let us know which individual parts you are needing as we do sell all of those separately.
Patrick,
That link brings me back to the kit, not just the drive train. Originally I was going to change out the bearings of
the original pump but opted to buy a replacement motor from INYOPools thus the other parts already purchased.
Thanks for your support. INYO is the best pool website.
Is the generic absolutely necessary for the motor change or is it an option to upgrade?
That link brings me back to the kit, not just the drive train. Originally I was going to change out the bearings of
the original pump but opted to buy a replacement motor from INYOPools thus the other parts already purchased.
Thanks for your support. INYO is the best pool website.
Is the generic absolutely necessary for the motor change or is it an option to upgrade?
Hi sparky,
No that kit is not absolutely necessary, you would only need it if you had damage to your impeller which normally is not the case. I would however always suggest one of these Hayward Super Pump Seal Kits when replacing your motor.
