My Aquarite Salt System is displaying HI and I have to over ride by switching to Super Chlorine. I have replaced both the Salt Cell and the PCB and aam stumped what to do next.
Thanks,
Tom
My Aquarite Salt System is displaying HI and I have to over ride by switching to Super Chlorine. I have replaced both the Salt Cell and the PCB and aam stumped what to do next.
Thanks,
Tom
The correct cell was selected. I cycled through the selections again but it is still showing HI.
The "HI" message will also appear if the salt level is too high (>3400ppm).
The red light that indicates there is too much salt is now lit. Thanks for your help!
You're welcome!